The CEO-700 is a completely integrated wireless remote whole house disconnect package complete with meter adapter, 00 amp switch, and the Nighthawk control board. Installation is lightning fast, requiring only the removal of the existing meter, plug in of the CEO-700 and replacement of the meter into the CEO-700. Upon installation the utility command center can then page the switch "on" or "off". It is literally that simple. An optional homeowner reset switch is available that would require the homeowner to push an easy to see button on the meter housing before the switch would actually close. Created to save thousands of dollars annually for our customers, as well as provide the convenience of remote control from any touch tone phone or by computer modem using our user-friendly software, the CEO-700 can be programmed to work on any public or private paging network. Ideal for seasonal use buildings, student apartment complexes, troubled accounts, and remote safety disconnect. No more conversations with Pit Bulls or Dobermans while disconnecting the power.

Features

• Low profile, 2.75 inch offset, ring or ringless sockets
• 4 and 5 Jaw Model
• Multi-Level security codes
• Optional Homeowner reset button
• LOW COST - Control functions are located on a single circuit board designed for mass production. Long term availability and short production lead times.

• Electrical Switching Capacity: 200 amps
• Paging Format: POCSAG 512 or 1200 Baud - Standard
• Operating Temperature: -20°C to +70°C,

PT1-LC

Designed for utility load control programs, the PT1-LC remote control switch uses paging signals from commercial and private paging networks for wide area control of residential and commercial loads. The PT1-LC will take a numeric or alphanumeric paging message in the POCSAG format at either 512 or 1200 Baud and convert it into control of three relay outputs. The outputs can be activated for a prescribed amount of time or be activated until commanded to de-activate. The PT1-LC also has cycle time functions built into the operating firmware that allow for cycling of loads for prescribed periods of time. It operates from either 120 VAC or 240 VAC power source.

Features

1 "Form C" High voltage, high current relay. (20 amp 240 volt, 20 amp 120 volt)
1 "Form C" low current relay.
Group Control Capability

• Ability to control domestic HVAC and Hot Water from a single control
• UV resistant Internal/External enclosures
• Compact package

• Enclosure: Plastic Polycarbonate
• Size: 10.5" x 7.25" x 3.75"
• Weight: .5 lbs
• Power Supply: 120 or 240 VAC (specifically when ordering)
• Operating Temperature: -30 to +60o C
• Connectors: Easy wire terminal strip
• Indicators: Standard on board LEDs. Optional exterior Indicator